http://www.cntruckcrane.com
Home > Video > Video Display > High Mast Light Installation in the Powder River Basin (Wyoming)

High Mast Light Installation in the Powder River Basin (Wyoming)

I  had to make a pick that can be a little difficult to setup.  I could only find one other video showing this done(which was very helpful), so I chose to share mine in hopes it helps someone else someday too. Happy Picking

Helpful notes
The tower is approximately 105' tall 
The boom tip had to be under the top of the mast to not damage the lighting
 A cable was ran the length of the pole and ran through the access door at the base,           around the bolt flange and clamped back into itself.
The other end of the wire rope was half hitched around the pole approximately 75' from the base and hooked to the crane.  
Working radius was 63' with 103' of boom extended.
Communicate with Supplier?Supplier
Mark Ma Mr. Mark Ma
What can I do for you?
Contact Supplier